High-Pressure Mud Hoses
Mud hoses are designed to withstand immensely powerful pressure. They are used to convey mud, oil, gas and other high-pressure media. They are often accompanied by other components for well control, including choke manifold and kill hoses.
The tube and cover of the hose are resistant to abrasion, oil, corrosion, cut, weather, ozone, and aging. It is also available with a variety of end connections.
Classification
High-pressure hoses take a beating from the pressurized water they carry, which can cause them to wear down. This can lead to a loss of pressure, or even a rupture. To prevent this, it is important to use a whip check that restrains the hose in place. Our Whipsock is more secure than a traditional whip check and has woven steel that grips the hose over a larger area, which can help prevent abrasion.
Mud and cement hoses are available in various sizes, working pressures, materials, and end fittings. JYM’s key offerings include rotary drilling and vibrator hose grade D and E, choke and kill hose, BOP control hose, Kelly hose, slim hole rotary hose, and hammer union. These are often used for oil fields, cement repairing, and geological exploration. In addition, they are also used in coal excavation. Their construction includes several layers of rubber and a power metal braid. The base layer is an internal rubber tube.
Uses
Choosing the right high pressure hose reel can help you save time and effort by taking away some of the manual work. They usually cost more than garden hoses but are much more durable and resistant to high temperatures and pressures. When shopping for a hose reel it is important to consider the size of the reel and the amount of water you will need to wash. Purchasing a smaller reel will not be worth the money.
Designed for discharge use of petroleum based fluids, dilute acids and abrasive chemical slurries used in oil well stimulation and fracking. Also used as a general service suction and discharge hose on drilling rigs. Contains a thick flexible inner liner that protects the hose construction from corrosive and abrasive effects of the conveyed medium. It distributes forces of internal pressure and helps prevent kinking even in sharp bends. A steel wire helix is optional for tough applications or to add abrasion resistance.
Implementation standards
Dredging hoses can be dangerous for anyone near them if the proper safety protocols are not followed. They are often under high pressure and can burst, causing serious injury or even death. They can also move or whip, posing a significant threat to those nearby. This can be prevented with the use of whip checks, which are steel cables that attach to the hoses and equipment and restrain them from whipping.
They are made of heavy-duty materials to withstand the harsh and abrasive conditions of dredging operations. They are also designed with the specific needs of dredging operations in mind, including the type of material being dredged and the size and power of the dredging equipment.
Workers should always wear personal protective equipment, such as hard hats and respirators, when working with these hoses. They should also make sure the hoses are properly grounded to avoid static electricity, which can cause electrocution. In addition, the hoses should be inspected on a regular basis to ensure that they are not showing signs of damage or leaking.
Technical parameters
The structure of rotary drilling hose is composed of tube, reinforcement and cover. Its tube is made from high quality synthetic rubber, mainly NBR, which is resistant to abrasion, corrosion and oils. Its reinforcement consists of 2-8 layers of high tensile and strong spiraled steel wire, making the hose work well in the high pressure working conditions. Its cover is made from chloroprene rubber, which makes the hose resistant to abrasion, cut, weather, ozone and aging. Its working temperature is -30 degC to +82 degC.
Our products include mud pump hoses, choke and kill hoses, cementing hoses and motion compensator hoses. Each hose is designed to handle different applications and operating conditions. We also offer various couplings, including hammer unions, camlocks and API flanges. In addition, we can provide armoured BOP hoses for blowout preventer systems. Our mud pump hoses are tested to 15000 psi, with a pressure test graph and letter of conformance. We recommend that you use a pressure gauge to check the hoses regularly. In the event of any damage, you should replace the hose immediately.
